[Starlingx-discuss] Duplex PXE Booting seems failed
Jaewook Oh
jwoh95 at dcn.ssu.ac.kr
Thu Feb 28 01:29:59 UTC 2019
Hi Austin,
I thought I had already replied to the mail on 22, but it seems there were
some mistakes.
Here are the information.
1.
- Here is the spec
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz
RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM
is needed, but I'm not sure, cause the installation was just stuck
literally,
SSD : 500GB
SuperMicro
- Bios Setting:
I enabled and disabled as the instruction said.
And at first try, I didn't used UEFI, after failure, I changed it into
UEFI, but the result was same.
I enabled VTx/Iommu enable or not ?
2. I used bare metal one.. however when I pressed the buttons, nothing
happened. And the controller-1 is just stopped as I said before.
Thank you for helping me :)
Best Regards,
Jaewook.
2019년 2월 28일 (목) 오전 10:12, Sun, Austin <austin.sun at intel.com>님이 작성:
> Hi Jaewook:
>
>
>
> 1. could you share the hw info for controller-1 ? and check bios
> setting ? is it using UEFI ? VTx/Iommu enable or not ?
>
> 2. Could you try access controller-1 and press Alt+F10 to see any log
> if the system is bare metal ?
>
>
>
>
>
> Thanks.
>
> BR
> Austin Sun.
>
>
>
> *From:* Jaewook Oh [mailto:kyle.oh95 at gmail.com]
> *Sent:* Friday, February 22, 2019 2:54 PM
> *To:* starlingx-discuss <starlingx-discuss at lists.starlingx.io>
> *Subject:* [Starlingx-discuss] Duplex PXE Booting seems failed
>
>
>
> Hello StarlingX Team,
>
>
>
> I finally solved the horizon error, the port number was different.
>
> I don't know why the port was changed, but anyway the port number was
> 8080, not 80.
>
>
>
> But I'm now facing new obstacles, Duplex PXE Booting.
>
>
>
> I succeed to connect PXE mode, but no more process..
>
>
>
> In Controller-0, I can find below result,
>
>
>
> [image: image.png]
>
>
>
> And another node that should've been controller-1, shows below letters on
> the display.
>
>
>
> 1) All-in-one
>
>
>
> Loading rel-19.01/installer-bzImage.........
>
> Loading
> rel-19.01/installer-initrd............................................................................ready.
>
>
>
>
>
> I waited this task for a day, but no changes.
>
>
>
> Any help would be very appreciated.
>
>
>
> Best Regards,
>
> Jaewook.
>
>
>
> ================================================
> *Jaewook Oh* (오재욱)
> IISTRC - Internet Infra System Technology Research Center
> 369 Sangdo-ro, Dongjak-gu,
> 06978, Seoul, Republic of Korea
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
>
--
================================================
*Jaewook Oh* (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
Tel : +82-2-820-0841 | Mobile : +82-10-9924-2618
E-mail : jwoh95 at dcn.ssu.ac.kr
================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/22adec92/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 47105 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/22adec92/attachment-0001.png>
More information about the Starlingx-discuss
mailing list