[Starlingx-discuss] StarlingX ISO Image from Cengn Mirror not working on Artesyn/MaxCore

[Scott Little]

Fix as of this image ...

http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/20190109T162801Z/outputs/iso/bootimage.iso 
<http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/20190109T162801Z/outputs/iso/bootimage.iso>


On 2019-01-09 11:08 a.m., Penney, Don wrote:
> I just checked the latest CENGN ISO, and it's still using the unmodified installer image. See attached email thread.
>
> Scott, any update on this issue?
>
> -----Original Message-----
> From: Marcel Schaible [mailto:marcel at schaible-consulting.de]
> Sent: Wednesday, January 09, 2019 10:24 AM
> To: starlingx-discuss at lists.starlingx.io
> Subject: [Starlingx-discuss] StarlingX ISO Image from Cengn Mirror not working on Artesyn/MaxCore
>
> Hi,
>
> I am trying to give the above mentioned ISO image a try on our ArteSyn/MaxCore box without success.
>
> After starting the installation I'll get the following message:
>
> [   18.503656] localhost iscsid[643]: iSCSI daemon with pid=644 started!
> [   18.503816] localhost iscsid[643]: can't open InitiatorName configuration file /etc/iscsi/initiatorname.iscsi
> [   18.503949] localhost iscsid[643]: Warning: InitiatorName file /etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or cxgbi iscsi), you may not be able to log into or
> [   18.504121] localhost iscsid[643]: can't open InitiatorAlias configuration file /etc/iscsi/initiatorname.iscsi
> [   18.504254] localhost iscsid[643]: can't open iscsid.safe_logout configuration file /etc/iscsi/iscsid.conf
> [   21.185105] localhost kernel: scsi 0:0:0:0: Direct-Access     Generic  Ultra HS-COMBO   1.98 PQ: 0 ANSI: 0
> [   21.204488] localhost kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
> [   18.665925] localhost multipathd[636]: sda: add path (uevent)
> [   18.667242] localhost multipathd[636]: sda: failed to get path uid
> [   18.667399] localhost multipathd[636]: uevent trigger error
> [   21.930592] localhost kernel: scsi 1:0:0:0: Direct-Access     TrekStor TrekStor USB CS       PQ: 0 ANSI: 0 CCS
> [   21.940187] localhost kernel: scsi 1:0:0:0: alua: supports implicit and explicit TPGS
> [   21.947210] localhost kernel: scsi 1:0:0:0: alua: No target port descriptors found
> [   21.953921] localhost kernel: scsi 1:0:0:0: alua: not attached
> [   21.959034] localhost kernel: sd 1:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.27 GiB)
> [   21.968220] localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
> [   21.973575] localhost kernel: sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [   21.974314] localhost kernel: sd 1:0:0:0: [sdb] No Caching mode page found
> [   21.980260] localhost kernel: sd 1:0:0:0: [sdb] Assuming drive cache: write through
> [   21.990203] localhost kernel:  sdb: sdb1
> [   21.994973] localhost kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
> [   19.533105] localhost multipathd[636]: sdb: add path (uevent)
> [   63.961502] localhost kernel: random: crng init done
> [  142.536373] localhost dracut-initqueue[646]: Warning: dracut-initqueue timeout - starting timeout scripts
> ...
> [  203.386668] localhost dracut-initqueue[646]: Warning: Could not boot.
> [  204.505706] localhost systemd[1]: Received SIGRTMIN+20 from PID 625 (plymouthd).
> [  204.505980] localhost dracut-initqueue[646]: Warning: /dev/root does not exist
> [  204.514883] localhost systemd[1]: Starting Dracut Emergency Shell...
> [  204.532145] localhost systemd[1]: Received SIGRTMIN+21 from PID 625 (plymouthd).
>
> I suspect that the installer is not finding the disk, which is in our case nvme0n1 and nvme1n1 flash storage.
>
> Any idea or hint is welcome!
>
> Thanks
>
> Marcel
>
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190109/a90b5c41/attachment.html>