[Starlingx-discuss] ansible deployment for duplex/standard

[Chen, Yan]

I tried to config oam/mgmt. for duplex/standard after ansible, and the controller1 and other nodes can be installed now.

But we still met issue when doing "system application-upload" because we have to use private registry in SH, but private registry is not successfully configed by ansible, please check this LP:
https://bugs.launchpad.net/starlingx/+bug/1830319

Thanks!

Yan

From: Chen, Yan [mailto:yan.chen at intel.com]
Sent: Friday, May 24, 2019 10:32
To: Poncea, Ovidiu <Ovidiu.Poncea at windriver.com>; starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] ansible deployment for duplex/standard

Thanks!
I will try.


Yan

From: Poncea, Ovidiu [mailto:Ovidiu.Poncea at windriver.com]
Sent: Thursday, May 23, 2019 18:21
To: Chen, Yan <yan.chen at intel.com<mailto:yan.chen at intel.com>>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: ansible deployment for duplex/standard

On controller-0 you need to delete the loopback interface and then configure the other nets on ctrl-0 with something like:

system host-if-modify controller-0 lo -c none
system host-if-modify controller-0 enp0s3 -c platform --networks oam
system host-if-modify controller-0 enp0s8 -c platform --networks mgmt
system host-if-modify controller-0 enp0s8 -c platform --networks cluster-host
system host-addr-list controller-0

The rest of the process is identical on the other nodes.

Ovidiu
________________________________
From: Chen, Yan [yan.chen at intel.com]
Sent: Wednesday, May 22, 2019 10:12 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] ansible deployment for duplex/standard
Hi

I wonder if anyone can help me on the ansible deployment for duplex/standard.

I installed ISO (about 0519) on vms and run ansible with my yml file as below, but the 2nd controller failed to be installed via pxe.
After checked controller0, I found that mgmt network is configured to lo.
But use "config_controller --force" everything's ok.

Am I doing anything wrong with the yml file?
There's no instruction on WIKI for duplex + ansible yet. (?)

---
system_mode: duplex

management_subnet: 192.178.204.0/28

external_oam_subnet: 10.10.10.0/24
external_oam_gateway_address: 10.10.10.1
external_oam_floating_address: 10.10.10.2
external_oam_node_0_address: 10.10.10.3
external_oam_node_1_address: 10.10.10.4




Yan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190524/3421d796/attachment-0001.html>