[Starlingx-discuss] StarlingX install question

Abhijit Deodhar abhideodhar at gmail.com
Mon Apr 6 07:00:59 UTC 2020


Ok, I tried it from controller-0 and that step worked. But now I am stuck
at the next step:

[image: image.png]

Since the step failed, I tried to repeat it. But I get an already
configured error as shown below:

[image: image.png]

Please advise on how to proceed further?

Thank you
Abhijit

On Mon, Apr 6, 2020 at 12:23 PM Yoshida, Shigeru <
Shigeru.Yoshida at windriver.com> wrote:

> Hi Abhijit,
>
>
>
> Please try following commands on controller-0:
>
>
>
> source /etc/platform/openrc
>
> OAM_IF=enp2s1
>
> system host-if-modify controller-1 $OAM_IF -c platform
>
> system interface-network-assign controller-1 $OAM_IF oam
>
> system interface-network-assign controller-1 mgmt0 cluster-host
>
>
>
> controller-1 is not configured at that point and system command normally
> be activated on active controller.
>
>
>
> Thanks,
>
> Shigeru
>
>
>
> *From:* Abhijit Deodhar <abhideodhar at gmail.com>
> *Sent:* Monday, April 6, 2020 3:25 PM
> *To:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] StarlingX install question
>
>
>
> Forgot to mention that I tried doing this step to enter the admin mode,
> but the openrc script doesnt seem to exist on controller-1
>
>
>
>
>
> [image: image.png]
>
>
>
> So I am not sure how to proceed.
>
>
>
> Please advise.
>
>
>
> ~Abhijit
>
>
>
> On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <abhideodhar at gmail.com>
> wrote:
>
> Hi,
>
>
>
> I am trying to install StarlingX on virtual standard with controller
> storage configuration. I am following the steps mentioned in this document:
>
>
>
>
> https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html
>
>
>
>
> I reached the step where 2 controllers and 2 workers are up and running.
> Now I am confused with "configure controller-1" step.
>
>
> https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html#configure-controller-1
>
>
>
>
> I see an error while doing this step on controller-1:
>
>
>
> [image: image.png]
>
>
>
> I tried using sudo to repeat the step:
>
> [image: image.png]
>
>
>
> Can someone please help me with this step to proceed with the installation?
>
>
>
> Regards
>
> Abhijit
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5108 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 35463 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 48750 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 25096 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0008.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 4877 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200406/55f5ae48/attachment-0009.png>


More information about the Starlingx-discuss mailing list