[Starlingx-discuss] StarlingX install question

[Wensley, Barton]

Abhijit,

I have a few suggestions that might help:

·         If this is your first time installing StarlingX, I think it would be better to try an AIO Simplex installation first - as per https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/aio_simplex.html.

·         In any case, since you ran into earlier issues, I think it would make sense for you to re-start your installation from the beginning.

If you hit issues in a fresh installation, send a new email to the mailing list. Please let us know the name of the load you are using as well.

Bart

From: Abhijit Deodhar [mailto:abhideodhar at gmail.com]
Sent: April 8, 2020 12:57 AM
To: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] StarlingX install question

Please help me

On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar at gmail.com<mailto:abhideodhar at gmail.com>> wrote:
Ok, I tried that step and it worked. But now I am hitting an issue at the next step:
[image.png]

How to get past this error or debug it?

Thanks
Abhijit

On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru <Shigeru.Yoshida at windriver.com<mailto:Shigeru.Yoshida at windriver.com>> wrote:
Hi Abhijit,

Please try following commands on controller-0:

source /etc/platform/openrc
OAM_IF=enp2s1
system host-if-modify controller-1 $OAM_IF -c platform
system interface-network-assign controller-1 $OAM_IF oam
system interface-network-assign controller-1 mgmt0 cluster-host

controller-1 is not configured at that point and system command normally be activated on active controller.

Thanks,
Shigeru


From: Abhijit Deodhar <abhideodhar at gmail.com<mailto:abhideodhar at gmail.com>>
Sent: Monday, April 6, 2020 3:25 PM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] StarlingX install question

Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1




So I am not sure how to proceed.

Please advise.

~Abhijit

On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto:abhideodhar at gmail.com<mailto:abhideodhar at gmail.com>> wrote:
Hi,

I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document:

https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html

I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step.
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html#configure-controller-1

I see an error while doing this step on controller-1:



I tried using sudo to repeat the step:


Can someone please help me with this step to proceed with the installation?

Regards
Abhijit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200408/96d1e6d4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 53164 bytes
Desc: image001.png
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200408/96d1e6d4/attachment-0001.png>