[Starlingx-discuss] The data interface eth1000 cannot be modified when I configure compute-0

Saul Wold sgw at linux.intel.com
Sat Feb 8 01:34:23 UTC 2020


I strongly urge you to look at the StarlingX 3.0 release. The 2018/10 or 
1.0 release is old and there have been many improvements.

Sau!


On 2/7/20 5:31 PM, Longqian Zhao wrote:
> Hi ,
> 
> I According to 
> https://docs.starlingx.io/deploy_install_guides/r1_release/controller_storage.html#id8 
> , the data interface eth1000 cannot be modified. Following is the detail 
> informations about my issue. Could you please help me? Thanks.
> 
> Brief Description
> 
> -----------------
> 
> My Environment:
> 
> I install StarlingX in Virtual Environment.
> 
> StarlingX version: 2018/10
> 
> stx-tools version: 2018/10
> 
> Steps:
> 
> 1. Install controller-0 succesfully.
> 
> 2. Install compute-0.
> 
> 3. source /etc/nova/openrc.
> 
> 4. system host-port-list compute-0
> 
> +--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+
> 
> | uuid                                 | name | type     | pci address  
> | device | processor | accelerated | device type           |
> 
> +--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+
> 
> | 2b735378-dd09-43b3-929f-5ca110a35001 | eth0 | ethernet | 0000:02:01.0 
> | 0      | -1        | True        | Virtio network device |
> 
> | 45c95b31-23ec-4eb4-aefb-eb22133a60a9 | eth1 | ethernet | 0000:02:02.0 
> | 0      | -1        | True        | Virtio network device |
> 
> | 51f58dac-3f6e-486d-bd67-300b15942b80 | eth2 | ethernet | 0000:02:03.0 
> | 0      | -1        | True        | Virtio network device |
> 
> | 62b4a45b-b167-456b-8b31-41b21d45b0da | eth3 | ethernet | 0000:02:04.0 
> | 0      | -1        | True        | Virtio network device |
> 
> +--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+
> 
> 5. system host-if-modify -p providernet-a -c data compute-0 eth1000
> 
> (The following is the returned information:)
> 
> Interface not found: host compute-0 if eth1000
> 
> Issues:
> 
> -----------------
> 
> 1. I did not find the data interface after executing the command: system 
> host-if-list compute-0
> 
> +--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+
> 
> | uuid                                 | name  | class    | type     | 
> vlan id | ports     | uses i/f | used by i/f | attributes | provider 
> networks |
> 
> +--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+
> 
> | b2642ea1-cf58-4bc7-92ab-bbfb374a04c3 | mgmt0 | platform | ethernet | 
> None    | [u'eth1'] | []       | []          | MTU=1500   | None        
>        |
> 
> +--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+
> 
> 2. I do not know how to use command "system host-if-add" to add data 
> interface.
> 
> /Best regards with you,/
> 
> /Longqian/
> 
> 
> 
> 
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> 



More information about the Starlingx-discuss mailing list