[Starlingx-discuss] The data interface eth1000 cannot be modified when I configure compute-0

[Lin, Shuicheng]

Hi,
As Saul said, it is highly recommended you have a try with 3.0 Release, instead of 1.0 Release, which is too old and not maintained now.
For your environment, with "host-port-list", there are eth0 ~ eth3, no eth1000.
So you should use eth2/eth3, instead of eth1000 as data interface.

Best Regards
Shuicheng

From: Longqian Zhao <zhaolongqian456 at 163.com>
Sent: Saturday, February 8, 2020 9:31 AM
To: starlingx-discuss at lists.starlingx.io
Subject: [Starlingx-discuss] The data interface eth1000 cannot be modified when I configure compute-0


Hi ,

I According to https://docs.starlingx.io/deploy_install_guides/r1_release/controller_storage.html#id8 , the data interface eth1000 cannot be modified. Following is the detail informations about my issue. Could you please help me? Thanks.

Brief Description

-----------------

My Environment:

I install StarlingX in Virtual Environment.

StarlingX version: 2018/10

stx-tools version: 2018/10

Steps:

            1. Install controller-0 succesfully.

            2. Install compute-0.

            3. source /etc/nova/openrc.

            4. system host-port-list compute-0

+--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+

| uuid                                 | name | type     | pci address  | device | processor | accelerated | device type           |

+--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+

| 2b735378-dd09-43b3-929f-5ca110a35001 | eth0 | ethernet | 0000:02:01.0 | 0      | -1        | True        | Virtio network device |

| 45c95b31-23ec-4eb4-aefb-eb22133a60a9 | eth1 | ethernet | 0000:02:02.0 | 0      | -1        | True        | Virtio network device |

| 51f58dac-3f6e-486d-bd67-300b15942b80 | eth2 | ethernet | 0000:02:03.0 | 0      | -1        | True        | Virtio network device |

| 62b4a45b-b167-456b-8b31-41b21d45b0da | eth3 | ethernet | 0000:02:04.0 | 0      | -1        | True        | Virtio network device |

+--------------------------------------+------+----------+--------------+--------+-----------+-------------+-----------------------+

            5. system host-if-modify -p providernet-a -c data compute-0 eth1000

(The following is the returned information:)
Interface not found: host compute-0 if eth1000


Issues:

-----------------

1. I did not find the data interface after executing the command: system host-if-list compute-0

+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+

| uuid                                 | name  | class    | type     | vlan id | ports     | uses i/f | used by i/f | attributes | provider networks |

+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+

| b2642ea1-cf58-4bc7-92ab-bbfb374a04c3 | mgmt0 | platform | ethernet | None    | [u'eth1'] | []       | []          | MTU=1500   | None              |

+--------------------------------------+-------+----------+----------+---------+-----------+----------+-------------+------------+-------------------+

2. I do not know how to use command "system host-if-add" to add data interface.

Best regards with you,

Longqian



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200208/e27f35e2/attachment-0001.html>